Loading ...
Loading ...
Loading ...
www.oster.com
www.oster.com
8
STORAGE AND MAINTENANCE
• Unplug cord and remove temperature controller. Allow
appliance to cool before storing. Store your Electric Skillet in a
dry location, such as on a tabletop or countertop, or on a
cupboard shelf. Wind the electrical cord into a coil and secure
with a twist fastener. For convenience, the temperature
controller and cord can then be stored inside the skillet.
Other than recommended cleaning, no further user
maintenance is necessary.
CARE & CLEANING
Your DuraCeramic™ Skillet should be cleaned after every use.
1. Unplug the skillet and allow it to cool before cleaning.
NOTE: To protect the DuraCeramic™ coating, do not run cold
water over cooking surface immediately after use.
2. Remove the temperature control probe. DO NOT IMMERSE
TEMPERATURE CONTROL PROBE or SKILLET IN LIQUIDS.
3. Wipe down the cooking surface with a damp cloth and dry
thoroughly. DO NOT use steel wool or other metal pads as this
may scratch the surface.
4. The skillet is NOT dishwasher safe. You may wash it with hot
soapy water, rinse and dry thoroughly.
CAUTION: TEMPERATURE CONTROL PROBE must always be
completely dry before use.
For proper care of your DuraCeramic™ coated skillet, follow
the following steps if suborn stains appear:
1. Sprinkle some baking soda on the stained area.
2. Add enough water to moisten the baking soda, making a
paste like texture.
3. Let sit for a few minutes (for tougher stains let sit up to an hour).
4. Lightly scrub with a plastic scouring pad or damp cloth and
dry thoroughly.
5. Repeat if necessary.
ANY SERVICE REQUIRING DISASSEMBLY OTHER THAN THE ABOVE
CLEANING MUST BE PERFORMED BY AN AUTHORIZED OSTER®
SERVICE CENTER.
Questions? Please call 800.334.0759 or visit us at www.oster.com.
Should any stubborn stains appear, they will not aect the
performance and non-stick quality of the DuraCeramic™ coating.
9
CKSTSK12WC-ECO_14EM1.indd 8-9 11/4/14 9:10 AM
Loading ...
Loading ...
Loading ...