Loading ...
Loading ...
Loading ...
16 17
HOW TO INSTALL THE FREEZER DRAWER
1.
Using 2 people (recommended), align end of the
exterior drawer rails to the lower rail guides located on
the sidewalls of the freezer compartment. Make sure
the gear teeth are engaged to the gear rail the same
amount on both sides.
2.
Fully push in and close freezer drawer to engage rails
with rail support locking tab, applying a bit of pressure
after the door is closed to seat the tabs to the rail.
CAUTION
: Make sure the tabs are completely
engaged to the rail or the refrigerator drawer could be
pulled out of the refrigerator by the user. Fully open the
freezer door to check and see if the locking tabs are
fully engaged. If they are not engaged, gently push
each freezer rail with a flat head screwdriver towards
the freezer compartment until the locking tabs snap to
the locked position.
3.
Replace the lower freezer drawer basket.
4.
Insert the upper freezer drawer above the lower basket,
and replace ice bin into upper drawer.
5.
Open and close the freezer drawer several times to
make sure operation is smooth and seal is consistent all
the way around the freezer compartment.
REFRIGERATOR INSTALLATION
This shows that
the tab is not
fully locked
If the tab is not fully engaged,
use a flat screwdriver to push
on the rail as shown to allow
the tab to snap into position
This shows that the
tab is fully in the
locked position
F706-10(�)(Kenmore).indd 17 2019-03-04 �� 10:40:25
Loading ...
Loading ...
Loading ...