Loading ...
Loading ...
Loading ...
English - 20
(7) Cubed Ice
(8) Crushed Ice
Press the Cubed Ice or Crushed Ice button to
select the type of ice you want dispensed.
Each time you press the button, the cubed and
crushed ice modes alternate and the Cubed
or Crushed ice icon lights up, indicating your
selection.
(9) Ice Off Icon
The Ice Off icon lights when you press the Ice Off
button (6) and turn the Ice-Maker off.
We recommend you stop ice making if
the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the
refrigerator.
If the ice maker function is ON, and the
water line is not connected, there will be
a water valve noise from the back of the
unit. If this occurs, press the Ice Off (Hold
3sec for child lock) button for less than 3
seconds until the Ice Off Indicator ( )
illuminates.
To save electricity, the Panel Display turns off
automatically under the following conditions: When
no button has been pressed, when no doors
are open, or when no Dispenser Lever has been
pushed.
However, the icon indicating your cubed or
crushed ice selection will stay on.
When you press a button, open a door, or push
a Dispenser Lever, the Panel Display will turn on
again.
All function keys, except Energy Saver and the
Cubed and Crushed keys will become operational
after you remove your finger from the button you
pressed.
(10) Filter Icon
Water filter usage
This icon lights up when you need to change the
filter, usually after the refrigerator has dispensed
about 300 gallons of water (after about 6
months).
The icon will blink red for several seconds when
you open or close the door.
After you install the new water filter, reset the
filter indicator by touching and holding the Hold
3sec for Filter Reset button for 3 seconds.
- If water is not dispensing or
dispensing slowly, you need to replace
the water filter because the water filter
is clogged.
- Some areas have large amounts of
lime in their water, which causes the
water filter to clog more quickly.
Cooling Off Mode
- North American (US, Canada) Models Only ;
Cooling Off mode (also called Shop mode),
is designed for use by retailers when they are
displaying refrigerators on the shop floor. In
Cooling Off mode, the refrigerator’s fan motor
and lights work normally, but the compressors
do not run, and the refrigerator and freezer do
not get cold.
To start Cooling Off mode, touch and hold the
Energy Saver button and the Freezer button for
5 seconds during normal operation.
The refrigerator chime sounds and the
temperature display flashes OFF.
To cancel Cooling Off mode, touch and hold the
Energy Saver and the Freezer buttons again for
5 seconds.
DA68-03028A-06.indb 20 2015. 11. 5. �� 8:09
Loading ...
Loading ...
Loading ...