Loading ...
Loading ...
Loading ...
Vehicle care 251
2. The spare wheel is secured with a
wing nut. Turn wing nut
anticlockwise and remove the
spare wheel.
Under the spare wheel there is the
box with vehicle tools.
3. When, after a wheel change, no
wheel is placed in the spare wheel
well, secure the tool box by
turning right back the wing nut and
close the floor cover.
Stowing the replaced full size
wheel in the spare wheel well
The spare wheel well is not designed
for all permitted tyre sizes. If a wheel
wider than the spare must be stowed
in the spare wheel well, the thread
bolt for mounting the wheel must be
replaced by an extension bolt, located
in the tool box 3 239. To replace the
bolt:
â– Remove tool box from the spare
wheel well.
â– Install the hexagon key of the wheel
wrench ensuring that it locates
securely on the bolt.
â– Turn the wheel wrench
anticlockwise to loosen the bolt.
Remove the bolt.
â– Take the extension bolt from the
tool box 3 239 and screw it in hand-
tight using the hexagon key of the
wheel wrench.
â– Store the tool box and the damaged
wheel outside up in the spare wheel
well and secure it by turning the
wing nut clockwise on the bolt.
The floor cover can be placed on the
projecting wheel.
To fit the spare wheel in the well after
renewing the defective wheel use the
short thread bolt again. Exchange the
bolt in the same way.
Loading ...
Loading ...
Loading ...