Loading ...
Loading ...
Loading ...
230 Vehicle care
3. Press out lamp housing from the
inside of the side trim panel.
4. Rotate plastic nut anticlockwise
and remove from the bulb holder.
5. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb. Insert plastic nut into
bulb holder by rotating clockwise.
Tail light (1)
Turn signal light (2)
6. Insert bulb holder into the tailgate
frame. Close cover in the side trim
panel.
Side turn signal lights
To replace bulb, remove lamp
housing:
1. On left vehicle side, slide lamp to
the front and remove it out of the
fender with the rear end.
On right vehicle side, slide lamp to
the rear and remove it out of the
fender with the front end.
2. Turn bulb holder anticlockwise
and remove from housing.
Loading ...
Loading ...
Loading ...