Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
39
6.6 To Adjust the Main Oven Door Catch Keep
Open the oven door, and slacken o the locknut at the
base of the keep (Fig. 8.9).
Screw in or out as required until the required t is
obtained. Retighten the locking nut.
6.7 To Replace an Oven Door Seal
Open the oven door. The seal has small hooks that hold
it in place by locating into holes in the rear door face
on the main oven and oven front face on tall oven. At
the corner, pull the seal diagonally away from the door
centre until the hook is released (Fig. 8.10). Proceed to
the next hook and release it in a similar way, and so on.
You can use force if the hooks are sti, as the old seal
will be discarded. Carefully lift away the inner back.
Reassemble in reverse order making sure that the four
screws and washers are fully tightened.
ArtNo.320-0005 Oven door rubber seal
Fig. 8.10
Loading ...
Loading ...
Loading ...