Loading ...
Loading ...
Loading ...
Operation
Haier LED HDTV EN-14
When the maximum recording duration is reached, R
the oldest program would be deleted and the
latest program is recorded.
When changing channel or changing input source, R
the timeshift would stop automatically.
Time shift record will store the fact of no signal. R
Time shift will store the video, audio and data R
service. we only support:
Video streams: Max 1 stream
Audio streams: Max 8 streams
CC stream: No limited.
In recording, the data is not guaranteed to be R
stored in the disk. If the timeshift playback plays
a corrupted data block, it would show “Data lost”
message to indicate that the current data is not
stored correctly.
Please connect the TV antenna or Cable TV coaxial R
cable to the Antenna input on the TV. Then please
complete the channel scan. The Time Shift feature
is available when using your ATSC tuner and QAM
cable tuner.
Function Menu Options
Press A MENU button and CH+/- button until the
following menu appears on the screen.
Function
Language English
OSDTimeout Short
OSDTransparency Middle
DCR On
Blue Screen On
Time Setup
ClosedCaption
Default
Select
CH+/-
VOL+/-
Back
EXIT
Video
Audio
Channel
Lock
Function
DPMS On
Screen Mode Normal
Press B VOL+/ ENTER button to enter the menu and
CH+/- button to go up and down to select the
desired option.
Press
C VOL+/ ENTER button to conrm and VOL+/-
button increase and decrease the level to adjust the
selected option to your preference.
Repeat step 2 and step 3 until desired quality has
D
been achieved.
Function
Language Y :Press VOL+/- button to select language of
the OSD.
OSD Timeout Y : Press VOL+/- button to select Middle
/Short and Long to change thetime of the OSD
display.
OSD Transparency Y : Press VOL+/- button to select
among Low/High and Middle to change the
transparency of the OSD. To select Low, the OSD is
opacity.
Screen Mode Y : Press VOL+/- button to select among
Normal/Wide/Zoom and Cinema to change the
display mode(display mode may dier from dierent
inputs).
DPMS Y : PC Power Management. When set On, the set
will be put in standby mode automatically if there is
no signal received for 2 minutes.
Blue Screen: Y Press VOL+/- button to select On, the
screen will be in blue after 3 seconds if there is no
signal.
DCR: Y Dynamic Contrast Ratio. Press VOL+/- button to
select On or O.
Time Setup: Y Press VOL+/ ENTER button to enter the
submenu.
Time Zone: • Press VOL+/- button to select the
appropriate time zone.
Time Setup
Time Zone
Date/Time
SleepTimer Off
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
CH+/-
VOL+/-
Date/Time: • Press VOL+/ ENTER button to enter
the submenu.
Date/T ime
Auto On
Date 2009/01/01
Time 11:54AM
Timer Off
On Time 11:54AM
OffTime 12:00 AM
Select
Back
EXIT
Video
Audio
Channel
Lock
Function
CH+/-
VOL+/-
Auto: Press
VOL+/- button to select On or O . When
Auto mode on , the time can not be adjusted. Select
Loading ...
Loading ...
Loading ...