Loading ...
Loading ...
Loading ...
32
(Continued)
RESETTING THE MICROCOMPUTER
TRANSPORTING THE UNIT
■ Headphones
● Before plugging in or unplugging the headphones, make
sure the volume level is reduced.
● Be sure your headphones have a 3.5 mm (1/8") diameter
plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.
● When headphones are connected, the speakers are dis-
connected automatically. Adjust the VOLUME control for the
desired volume.
Note:
● If you use headphones, cancel the Dolby Pro Logic Sur-
round mode.
Even after the headphones are connected, if the unit is in
the Dolby Pro Logic Surround mode, sound will still be heard
from the surround and centre speakers.
Before you move this product to a new location, pro-
ceed as follows:
1Press the ON/STAND-BY button to turn the power on.
2Press the CD button.
3Press the OPEN/CLOSE button to open the disc tray.
● Remove all CDs inserted in the unit.
4Press the OPEN/CLOSE button to close the disc tray.
● Make sure that “NO DISC” is displayed.
5Press the ON/STAND-BY button to enter the stand-by mode,
and then unplug the AC power lead from the AC socket.
Reset the microcomputer under the following con-
ditions:
● To erase all of the stored memory contents (clock and timer
settings, and tuner and CD presets).
● If the display is not correct.
● If the operation is not correct.
1Press the ON/STAND-BY button to enter the stand-by mode.
2Whilst pressing down the 0/R button and the X-BASS/
DEMO button, hold down the ON/STAND-BY button for at
least 1 second.
● “CLEAR AL” will appear.
Caution:
● The operation explained above will erase all data stored in
memory including clock and timer settings, and tuner and
CD presets.
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...