Loading ...
Loading ...
Loading ...
24
(Main unit operation)
(Continued)
(Main unit operation)
■ To manually recall the stations stored in
memory
Press the PRESET (X or W) button.
● Each time the button is pressed, the channel number will
change.
● After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
■ To switch the display
Each time the DISPLAY MODE button is pressed whilst an FM
station is tuned in, the display will switch as follows:
Station
→
Programme
→
Radio text
→
Frequency
name (PS) type (PTY) (RT)
↑
When the station you are tuning in is not an RDS station or
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
“NO PS”
→
“NO PTY”
→
“NO RT”
→
Frequency
↑
Notes:
● “NO PS”, “NO PTY” or “NO RT” will flash for about 5 sec-
onds, and then the frequency will be displayed.
● The display can only be switched whilst tuned to the FM
band.
■ Notes for Radio text
● The radio text for 8 characters will be displayed steadily for
4 seconds and then it will scroll across the display.
● If you tune into a station which is not broadcasting any radio
text, even if it is an RDS station, when you switch to the
radio text position “NO RT” will be displayed.
● Whilst radio text data is being received or when the text
contents change, “RT” will be displayed.
■ Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty.
● “PS”, “NO PS” and a station name appear alternately, and
the unit does not operate properly.
● If a particular station is not broadcasting properly or a sta-
tion is conducting tests, the RDS reception function may
not work properly.
● When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed, even
if “RDS” is lit.
Downloaded from: http://www.usersmanualguide.com/
Loading ...
Loading ...
Loading ...