Loading ...
YOUR SAFETY FIRST
BEFORE YOU START
* Proper installation is the installer's responsibility!
- Read the entire manual before you begin.
- The model number label is located on the oven front. See Figure 1.
- Mounting plate is located on back side of microwave oven. See Figure 2.
BE SURE TO READ THE FOLLOWING SAFETY iNSTRUCTiONS:
Model Number Labei
"i
li
_ _Mounting plate
Mounting plate
screw (2 screws)
Figurel Figure 2
WARNING
FOR YOUR SAFETY:
• You wiii need TWO people to install this oven. it is heavy and could cause personal injury if not
handled properly. The dimensions of the oven are as follows:
Height : 16-z,66 inches
Width : 29-15,66 inches
Depth : 15-_8 inches
Weight : 52 pounds
• AVOID ELECTRICAL SHOCK!
- Before you drill into the wail, note where electrical outlets are and where electrical wires might be con-
ceaied behind the wall.
YOU COULD GET AN ELECTRIC SHOCK it you contact electrical wires with your drill bit.
- Locate and disconnect the power of any electrical circuits that could be affected by installing this oven.
iF YOU DO NOT DISCONNECT THE POWER, YOU COULD GET AN ELECTRIC SHOCK.
• ELECTRICAL RATING OF THiS OVEN: 120V, 60Hz.
13 Amps(14 Amps appiys 8002)/1500 Watts (Microwave oven + Cooktop Lamp + Ventilation Fan)
- You need a 120V, 60Hz, AC only, 15A or 20A, fused electrical supply (located in the cabinet above
the microwave as close as possible to the microwave circuit) serving only the microwave.
Loading ...
Loading ...
Loading ...