Loading ...
Loading ...
Loading ...
41
10-Cycle Electric and Gas Dryers
www.insigniaproducts.com
USER MAINTENANCE INSTRUCTIONS
Understanding the error codes
Your dryer is equipped with an automatic error-monitoring system to
detect and diagnose problems at an early stage.
Dryer shuts
off before the
clothes are
dried.
• The dryer load is too small. Add more items or a few towels and
restart the cycle.
• The dryer load is too large. Remove some items and restart the
cycle.
• Consider using a Time dry cycle.
Dryer has an
odd odor.
• Your dryer draws air from the surrounding room air. Household
odors from paint, varnish, strong cleaners, and so forth, may enter
your dryer with the surrounding room air. This is normal. When
these odors linger in the air, ventilate the room completely before
using your dryer.
Clothing is
still wrinkled
after using
the Wrinkle
Prevent
setting.
• Small loads of one to four items work best.
• If the dryer load is too large, items cannot tumble freely. Try
loading fewer items.
• Make sure that the items in the dryer load are similar. The Wrinkle
Prevent setting works best when the items in the dryer load are
similar-type items.
There is lint
on the
clothing.
• Check pockets thoroughly before washing and drying clothes.
Things like paper or tissue can break up into small pieces that turn
into lint.
• Clean the lint filter before every cycle. Some loads that produce
high amounts of lint can clog the filter.
• Some fabrics are lint producers (like a fuzzy white cotton towel)
and they should be dried separately from clothes that are lint
trappers (like a pair of black linen pants).
• Divide larger loads into smaller loads for drying.
ERROR CODE POSSIBLE CAUSE SOLUTIONS
C9 The PCBs failed. Contact authorized service
personnel for help. DO NOT use
your dryer.
E4 The humidity sensor failed. Your dryer will complete the current
operating cycle but items could be
over dried. Your dryer can still
operate under the Time cycles.
Contact authorized service
personnel for help.
E5 The temperature sensor failed. Contact authorized service
personnel for help. DO NOT use
your dryer.
PROBLEM SOLUTION
Loading ...
Loading ...
Loading ...