Loading ...
Loading ...
Loading ...
11
www.insigniaproducts.com
10-Cycle Electric and Gas Dryers
INSTALLATION INSTRUCTIONS
Choosing a location
You should locate your dryer where there is enough space at the front for loading
the dryer and enough space behind for the exhaust system.
Your dryer is factory-ready for the rear exhaust option.
Make sure that the room you install your dryer in has enough fresh air and that
there are no air-flow obstructions.
Do not install or store your dryer in an area where it will be exposed to water or
weather. Keep the dryer area clear of combustible materials, gasoline, and other
flammable vapors and liquids. Your dryer produces combustible lint. Keep the
area around the dryer lint-free.
Important to installer:
Read the following instructions carefully before installing the dryer. These
instructions should be kept for future reference.
• The dryer is not suitable for installation in a mobile home.
• Remove the door from all discarded appliances to avoid the danger of a child
being trapped and suffocating.
• After unplugging a discarded appliance, cut off the power cord.
• Provisions for introduction of outside air into the dryer room. The free area of
any opening for the introduction of outside air shall not be less than twice the
area of the dryer exhaust outlet.
WARNING: Your dryer must be exhausted to the outside to reduce the risk of
fire when installed any place inside the house.
27 in.
68.6 cm
4
5
.
8
i
n
.
1
1
6
.
3
c
m
Loading ...
Loading ...
Loading ...