Loading ...
Loading ...
Loading ...
8
Powders and Gels
*The prewash compartment is on top of the sliding door
of the dispenser.
**A full main wash compartment contains 2 Tbsp (30 ml)
IMPORTANT: Extremely hard water mineral deposits (15 grains
per U.S. gallon or more) can cause damage to your dishwasher
and make it difficult to achieve good results. A water softener is
recommended to avoid damage and achieve good results. You
may bring your water samples to Sears to check hardness level.
NOTE: Follow instructions on the package when using other
dishwasher detergent types.
Add Rinse Aid
IMPORTANT: Your dishwasher is designed to use rinse aid. The
use of rinse aid greatly improves drying by allowing water to drain
from the dishes after the final rinse. Rinse aid also keeps water
from forming droplets that can dry as spots or streaks.
Filling the dispenser
The dispenser holds 5 oz (150 mL) of rinse aid. Under most
conditions, this will last 1 to 3 months.
NOTE: Indicator reads correct fill level when door is
completely opened.
Rinse Aid Setting
Your rinse aid dispenser is adjustable. For most water conditions,
the factory setting will give good results. If you have hard water
and notice calcium buildup on your dishware, you may want to
try a higher setting. If you notice foam in your dishwasher, use a
lower setting.
To adjust the setting:
Turn the arrow adjuster to a higher setting to increase the amount
of rinse aid.
Select a Cycle (cycles vary by model)
Press and hold the desired cycle button until the corresponding
light is on. See “Cycle and Option Descriptions” charts in the
following section.
NOTE: Heavier cycles and options affect cycle length. Some
cycles and options will take up to 3¹⁄₂ hours to complete.
Select Options (options vary by model)
You can customize your cycles by pressing the options desired.
Water
Hardness
Soil
Level
PreWash
Compart-
ment*
Main Wash
Compartment
Soft
(0-4 grains per
U.S. gallon)
Light None “Soft” fill line
Normal None “Soft” fill line
Heavy Full “Soft” fill line
Medium
(5-9 grains per
U.S. gallon)
Light None “Soft” fill line
Normal Full “Soft” fill line
Heavy Full Full**
Hard
(10-14 grains
per U.S.
gallon)
Light Full Full**
Normal Full Full**
Heavy Full Full**
STEP 3
Hinged lid style Sliding lid style
USE RINSE AID FOR
BETTER DRYING
Lock
Refill
Full
Add
SLIDE
Full
Add
Full
Ad
d
Add rinse aid to hinged lid
style dispenser by twisting
the dispenser cap ¼ turn
clockwise to open and lift
off. Pour rinse aid into the
opening until the indicator
level is at “Full.” Replace the
dispenser cap and turn to
“Lock.” Make sure cap is
fully locked.
¼ turn clockwise to lock
To add rinse aid to sliding lid
style dispenser, open the
rinse dispenser lid by gently
pushing in the center of the
lid with your thumb and
pulling up on the edge. Pour
rinse aid into the opening
until the dispenser is full.
Then, close the dispenser
by pushing down gently
on the lid.
STEP 4
Lock
6
5
4
3
2
-
-
-
max
fill
1
-
-
-
-
-
-
-
-
-
-
-
Pre Wash
OPEN
SLIDE
6
5
4
3
2
-
-
-
max
fill
1
-
-
-
-
-
-
-
-
-
-
-
-
Loading ...
Loading ...
Loading ...