Loading ...
Loading ...
Loading ...
10
OPTION SELECTIONS
OPTIONS CAN BE
SELECTED
WITH WHAT IT DOES
Can be selected with any wash cycles. When selected with the 1 Hour
Wash cycle, the time is increased by approximately 30 minutes.
Any cycle
except
Rinse Only
Uses the heating element
to speed drying times.
Raises the main wash temperature to improve cleaning for loads
containing tough, baked-on food.
Sensor
Heavy
Normal
Raises the main wash
temperature from 105°F
(41°C) to either 130°F (55°C)
or 140°F (60°C).
Sanitizes dishes and glassware in accordance with NSF International
NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food establishments. Only
sanitizing cycles have been designed to meet the requirements of the
NSF/ANSI 184 performance standard for soil removal and sanitization
efficacy. There is no intention, either directly or indirectly, that all cycles
on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184
performance standard for soil removal and sanitization efficacy.
Sani Rinse indicator is lit at the end of the cycle if the Sani Rinse option
was successfully completed. If indicator does not light, it is probably due
to the cycle being interrupted.
Sensor
Heavy
Normal
Increases the main wash
temperature from 105°F
(41°C) to 130°F (54°C) and
the final rinse from 140°F
(60°C) to 155°F (68°C).
Can be selected with any cycle for washing a small load of dishes in the
top rack.
Available
with any
cycle
Delays the start of the cycle for 4 hours.
To delay the start:
1. Select a wash cycle and options.
2. Press DELAY.
3. Press START/RESUME to begin 4 hour delay.
NOTE: If the door is opened (such as to add a dish), the Start/Resume
button must be pressed to resume the delay countdown.
Available
with any
cycle
Delays the start of a cycle
for a maximum of 4 hours.
CONTROLS AND CYCLE STATUS
CONTROL PURPOSE COMMENTS
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator
is lit, all buttons are disabled. The dishwasher door can still be opened/closed while the controls are locked.
To follow progress of
your dishwasher cycle.
NOTE: Indicators shown
are not available on all
models.
If you select the Sani Rinse option, when the cycle is finished, the “Sanitized” indicator
glows.
If your dishwasher did not properly sanitize your dishes, the light flashes at the end of
the cycle. This can happen if the cycle is interrupted or water could not be heated to
required temperature.
The light goes off when you open and close door or press CANCEL.
Loading ...
Loading ...
Loading ...