Loading ...
Loading ...
Loading ...
18 19
4 Remove the charcoal filter by pushing it inwards, then lift up and pull it out
of the microwave.
5 Insert the new charcoal filter, close the vent grill, and secure with the vent grill screws.
6 Plug the microwave back in or turn the power back on at the main circuit breaker.
Replacing the lights
Surface light (external)
1 Unplug the microwave oven or turn off power at the main circuit breaker.
2 Remove the light cover screws under the microwave.
3 Remove the old light bulbs and replace with new 1.2W LED lights.
4 Reinstall the light cover screws to secure the covers.
5 Plug the microwave back in or turn the power back on at the main circuit breaker.
Microwave light (internal)
1 Unplug the microwave oven or turn off power at the main circuit breaker.
2 Remove the vent grill screws.
3 Pull the vent grill away from the unit.
BOTTOM
1 To remove the exhaust filters, slide the filter toward the back of the microwave, then pull it downward while
sliding it out of the side slot. Repeat for the second filter.
2 Soak the ventilation filters in hot water using a mild detergent or wash in a dishwasher. Rinse well and shake to
dry.
3 To reinstall the exhaust filter, slide it into the side slot, then push up and toward the front of the microwave to
secure it. Repeat for the second filter.
Replacing the charcoal filter
The charcoal filter is used in non-vented, recirculated installations. The filter should be changed every 6 to 12
months depending on use.
1 Unplug the microwave oven or turn off power at the main circuit breaker.
2 Remove the vent grill screws.
3 Pull the vent grill away from the unit.
CAUTION
Do not use ammonia. The aluminum on the filter will corrode and darken.
Surface lights
BOTTOM
Ventilation filters
BOTTOM
Loading ...
Loading ...
Loading ...