Loading ...
Loading ...
Loading ...
ENGLISH 13ENGLISH12
C ◗ Cleaning Indicator
The blinking faucet symbol will remind you that
razor heads need to be cleaned.This happens
after each shave.
C ◗ Replacement Head Indicator
Every year, depending on your shaving behavior,
after turning the razor OFF,the replacement
head symbol indicator starts to blink and you
will hear a beep.The replacement head symbol
will remain visible for the next 7 shaves to
remind you that with new shaving heads you
will guarantee yourself optimal shaving
performance.
◗ You can reset the razor by pressing the
ON/Off button for 3 seconds while the
replacement head symbol is blinking. The
symbol then disappears,and you will hear a
short confirming beep.
◗ If you do not reset the razor,after 7 shaves
the razor will automatically reset itself.
NO
TE:
If the display shows the w
ord ‘CHECK’ and
a blinking replacement head symbol and faucet
symbol, clean the r
azor thoroughly bef
ore you
continue sha
ving (see ‘cleaning’).
After cleaning, if
the word ‘CHECK’ and a blinking replacement
head symbol and faucet symbol remain on the
display, immediately replace the razor heads (see
‘replace the razor heads’).
◗ Low Battery Indicator
C - The Numeric Display:
When the battery is running low,the plug
symbol and the minutes indicator will blink
after you have turned the razor OFF. You will
also hear a few short beeps.If this occurs while
shaving,you should have enough power to
complete your shave.When you turn razor ON
or OFF the display will come on for
approximately 10 seconds.
C - The Battery Display:
When the battery is running low,the plug and
battery symbols will blink after you turn
razor OFF. You will also hear a few short beeps.
When you turn razor OFF or ON the display
will stay on for approximately 10 seconds.
C ◗ Battery Empty
To indicate that the battery power is too low
to operate the razor,‘Lo’appears on the display.
◗ Demonstration Program
The razor has a demonstration program that
will run through the display of razor functions.
During the demonstration the razor will
automatically turn ON and OFF 2 times. To
activate,press and hold the ON/OFF button
for approximately 6 seconds. After 3 seconds
the lock symbol appears;keep the ON/OFF
button pressed.Then release the button and
the razor will continue through the
demonstration program.You can interrupt the
demonstration by pressing the ON/OFF button
again.
Loading ...
Loading ...
Loading ...