Loading ...
Loading ...
Loading ...
setting up _21
Removing residual matter inside the water supply line after installing lter
1. Turn ON the main water supply.
2. Press the Water button and push the dispenser pad.
Refer to ‘Checking the control panel’ in the manual (page 22)
3. Flush 3 gallons of water through the lter befor use.
(Flush approximately 6 minutes.)
This will clean the water supply system and remove air from the lines.
4. Additional ushing may be required in some households.
5. Open the refrigerator door and make sure there are no water leaks coming
from the water lter.
A newly installed water lter cartridge may cause water
to briey spurt from the water dispenser. This is due to air
getting into the line. It should pose no problem to operation.
01 SETTING UP
LOCK
Ice
Water
Loading ...
Loading ...
Loading ...