Loading ...
Loading ...
Loading ...
20
CAUTION — The cooktop, as shipped from the factory, is set for use with its intended gas. If you
wish to use your cooktop with the alternate gas, you must first replace the orifices and convert the pressure
regulator.
WARNING — This conversion must be performed by a qualified installer or gas supplier in accordance
with the manufacturer’s instructions and all codes and requirements of the authority having
jurisdiction. Failure to follow instructions could result in serious injury or property damage. The qualified
agency performing this work assumes responsibility for the conversion.
CAUTION — The following adjustments must be made before turning on the burner. Failure to do so
could result in serious injury. Be sure pressure regulator has been converted as described in Step 1.
TOOLS YOU WILL NEED FOR CONVERSION
Crescent wrench
7mm nutdriver Safety glasses
Small flat-head screwdriver (2 to 2.4 mm or 3/32″ tip size, 60 mm long)
1) ADJUST THE REGULATOR
A. Disconnect all electrical power, at the main circuit breaker or fuse box.
B．Shut off the gas supply to the cooktop by closing the manual shut-off valve
C．Adjust the pressure regulator by the following instructions:
Unscrew the cap with a Crescent wrench.
Loading ...
Loading ...
Loading ...