Loading ...
Loading ...
Loading ...
14
OPERATION CHECKLIST
1． Make sure all controls are left in the OFF position.
2． The serial plate for your cooktop is located on the bottom of the burner box. In addition to the
model and serial numbers, it tells you the ratings of the burners and the type of fuel and pressure
the cooktop was adjusted for when it left the factory.
3． When ordering parts, always include the serial number, model number and a code letter to ensure
proper replacement parts.
3． Check again to be sure all installation procedures have been completed.
COOKTOP INSTALLATION WITH A 36″MONOGRAM DOWNDRAFT VENT
The installation of the downdraft vent with this cooktop requires careful consideration. Both the cooktop
and the vent must be installed according to each specific installation instruction.
BASE CABINET REQUIREMENTS
The combined installation will fit in a standard 24″ deep base cabinet. Use a 36″ or wider base cabinet.
——The vent housing, blower and ductwork will occupy the base cabinet.
COOKTOP REQUIREMENTS
The countertop must have a deep flat surface to accommodate the cooktop and vent. Countertops with a
rolled front edge and backsplash will not provide the flat surface area required.
·Review the illustration to determine the countertop surface requirements.
——All cutout clearances for this installation must be observed.
Loading ...
Loading ...
Loading ...