Loading ...
Loading ...
Loading ...
6 7
IN THE COMMONWEALTH OF MASSACHUSETTS:
·This product must be installed by a licensed plumber or gas fitter.
·When using ball-type gas shut-off valves, they shall be the T-handle type.
·A flexible gas connector, when used, must not exceed 3 feet.
Be sure the installation of this product in a mobile home conforms with the
Manufactured Home Construction and Safety Standard, Title 24 CFR, Part
3280. If this standard does not apply, you must follow the standard for Man-
ufactured Home Installations, ANSI A225.1 and Manufactured Home Installa-
tions, Sites and Communities, ANSI/NFPA 501A or with local codes. You can
get a copy of the Federal Standard by Writing: Office of Mobile Home Stan-
dards HUD Building 451 7th Street, S.W. Washington, D.C. 24010.
ELECTRICAL REQUIREMENTS
This appliance must be supplied with the proper voltage and frequency and
connected to an individual, properly grounded branch circuit, protected by a
circuit breaker or fuse having amperage as noted on the rating plate.
We recommend you have the electrical wiring and hookup of your cooktop
connected by a qualified electrician. After installation, have the electrician
show you where your main cooktop disconnect is located.
Check with your local utilities for electrical codes which apply in your area.
Failure to wire your cooktop according to governing codes could result in a
hazardous condition. If there are no codes, your cooktop must be wired and
fused to meet the requirements of the National Electrical Code, ANSI/NFPA
No. 70— Latest Edition. You can get a copy by writing: National Fire Pro-
tection Association Battery march Park Quincy, MA 02269 In Canada, your
cooktop must be wired and fused to meet the requirements of the Canadian
Electrical
Code.
Convert LP Gas to Natural Gas Operation
If sold outside the U.S. and Canada:
If you wish to use this product with Liquefied Petroleum (LP) gas containing
greater than 10% butane, you must purchase the conversion kit #850SLTX-
ELP. To order, please call 1-888-784-3108
MATERIALS YOU MAY NEED:
- Joint Sealant Pipe Fittings Shut-Off Valve,
- CSA-Approved Flexible Gas Line
Note: Purchase new line, do not use previously used flexible gas line.
1X 1X
1X
4X
9X
INSTALLATION PREPARATION
1. When preparing cooktop opening, make sure the inside of the cabinet
and the cooktop do not interfere with each other. (See section on pre-
paring the opening.)
2. Slide the cooktop out of the end of the box. Remove packaging mate-
rials, grate boxes, regulator and 5 literature package from the cooktop
before beginning installation. Use the shipping carton as a pad to pro-
tect customer countertops or flooring
3. Remove Installation Instructions from literature package and read them
carefully before you begin. Be sure to place all literature, Owner’s Manu-
al, Installations, etc. in a safe place for future reference.
4. Make sure you have all the tools and materials you need before starting
the installation of the cooktop.
5. Your home must provide the adequate electrical service needed to safely
and properlyyou’re your cooktop. (Refer to section on electrical require-
ments.)
6. When installing your cooktop in your home, make sure all local codes
and ordinances are followed exactly as stated.
7. Make sure the wall coverings, countertop and cabinets around the cook-
top can withstand heat (up to 200°F) generated by the cooktop.
PARTS INCLUDED:
Flexible
Connector
Loading ...
Loading ...
Loading ...