Loading ...
Loading ...
Loading ...
49-80759
13
INSTALLATION INSTRUCTIONS
Installation Instructions
INSTALLING THE JUNCTION BOX
Install an approved junction box where it will be
easily reached through the front of the cabinet
where the cooktop will be located. The cooktop
conduit is 4 feet long.
IMPORTANT: The junction box must be
located where it will allow considerable slack in
the conduit for serviceability.
SECURE THE COOKTOP
Secure the tub of the cooktop to a standard counter
with the wood screws shipped with the cooktop.
Secure the tub of the cooktop to a tile counter
with 4 masonry screws. These can be purchased
at any hardware store.
A
When making the wire connections, use the
entire length of conduit provided. The
conduit must not be shortened.
B
With the cooktop in place, open the front of
the cabinet door.
C
Insert the wires from the conduit through
the opening of the junction box. Secure
conduit with a matching strain relief clamp.
D
Connect the red and black leads from the
cooktop conduit to the corresponding leads
in the junction box.
E
Once the connections are made, secure
wires together using wire nuts.
IMPORTANT: If the cooktop is being
installed into a blind counter (one with no
cabinet opening below), wire connections must
be made before putting the cooktop into the
cutout opening.
INSERT COOKTOP INTO CUTOUT
Insert the cooktop centered into the cutout
opening. Make sure the front edge of the
countertop is parallel to the cooktop. Make final
check that all required clearances are met.
INSTALLING THE COOKTOP
,167$//$7,21³
ELECTRICAL CONNECTIONS
Install junction box so
that it can be reached
through the front of the
cabinet.
16"
Min.
Strain Relief Clamp
Ground
Red
Black
Black
Red
Ground wire
location
Strain Relief
Clamp
Black
Red
Ground
Cooktop
Loading ...
Loading ...
Loading ...