Loading ...
Loading ...
Loading ...
81
At a glanceControls Car careRepairsTechnicalDataIndex
To stop:
When the time is displayed:
d Press the SET/RES key.
If other information is displayed:
d Key sequence as in illustration.
Take intermediate time:
d Press the TIMER key.
The LED flashes, the intermediate time
is displayed and the timer continues to
run.
Display time again:
d Press the TIMER key again.
bThe timer stops with the ignition
key in position 0 and runs again in posi-
tion 1.c
Independent ventilation*
To enter activation times
You can select two starting times for
independent ventilation. After 30 min-
utes the ventilation shuts off again auto-
matically.
Refer to page 87 for important informa-
tion on using the independent ventila-
tion system.
When you press the TIMER key, the
current status of the ventilation appears
in the display.
Enter a switch-on time:
Before you can enter data, the ignition
key must be at position 1 and the digital
clock must be visible in the display.
Repeat key sequence as in the illustra-
tion. (Press the TIMER key twice).
Enter the second switch-on time:
Repeat key sequence as in illustration.
Correct the entered time:
Repeat the key sequence as shown in
the illustration, but enter a different
time.
After you enter the time, an asterisk
∗
appears in the display and the LED
lights up, so that you can ascertain that
a switch-on time has been selected.
During ventilation the LED blinks. It
goes off when you turn the switch off.
Request a previously selected time
(LED lights up):
d For the first switch-on time, press the
TIMER key twice.
d For the second switch-on time, press
the TIMER key three times.
360us311
Onboard computer*
Online Edition for Part No. 01 41 9 790 377 - © 07/98 BMW AG
Loading ...
Loading ...
Loading ...