Loading ...
Loading ...
Loading ...
61
MIU menu
MIU menu (continued)
Item Description
SETUP
(continued)
SPEED
Use the ▲/▼ buttons to select
the transfer rate.
(M : Mbps : Megabits per second)
AUTO
ó
54M
ó
48M
ó
36M
ó
24M
ó
18M
ô ô
1M
ó
2M
ó
5.5M
ó
6M
ó
9M
ó
11M
ó
12M
• The AUTO mode automatically
selects the optimum rate.
• Transfer rates may change due
to the network situation.
NETWORK
MODE
Use the ▲/▼ buttons to select
the network mode.
WIRELESS
ó
WIRED
• The network mode will be initialized whenever
the power is turned on with the power switch.
• The WIRELESS will be enabled when the
wireless network card is inserted.
• The WIRED will be enabled when the wireless
network card is not inserted.
PROJECTOR
NAME
(1)
Use the
▲/▼
buttons on the MIU menu to select the PROJECTOR NAME menu
and press the
►
button. The PROJECTOR NAME dialog will be displayed.
(2)
The current PROJECTOR NAME will
be displayed on the rst 3 lines. If not
yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the
ENTER or INPUT button to select and
enter characters. The RESET button
can be used to erase 1 character at
a time. Also if you move the cursor to
DELETE or ALL CLEAR on screen
and push the ENTER or INPUT button,
1 character or all characters will be
erased. The PROJECTOR NAME can
be input up to 64 characters.
(3)
To change an already inserted character,
press the
▲/▼
button to move the cursor
to one of the rst 3 lines, and use the
◄/►
buttons to move the cursor on the
character to be changed. After pressing the
ENTER
or
INPUT
button, the character is
selected. Then, follow the same procedure
as described at the item (2) above.
(4)
To nish entering text, move the
cursor to the SAVE on screen and
press the
ENTER
or
INPUT
button.
To revert to the previous PROJECTOR NAME without saving changes, move
the cursor to the CANCEL on screen and press the ENTER or INPUT button.
(continued on next page)
Loading ...
Loading ...
Loading ...