Loading ...
Loading ...
Loading ...
12
Setting up
Using a USB storage
Inserting the SD card
In order to view images stored in an SD storage, such as an SD memory card,
insert the device into the SD card slot. Or, in order to use the wireless network
function, load the internal clock battery (
68) and insert the designated wireless
network card that is sold as an option (76) into the slot.
In order to view images stored in a USB storage,
such as a USB memory, insert the device into
the
AUX I/O port. Before removing the USB
storage, be sure to perform the REMOVE MEDIA
procedure using the PC-LESS PRESENTATION
menu under the MIU menu.
Using an SD card
1.
Make sure that the power code is not plugged into the projector
for the wireless network card only.
2.
Remove the SD card slot cover. After slowly insert the SD card
completely into the SD card slot, replace the SD card slot cover.
Using the slot cover lock for security
1.
Open the two plates of the slot cover lock to put the tips of two plates
together, and then insert the tips to the lock hole of the SD card slot cover.
2.
Put the body of the two plates together. Then, hook a padlock or
combination lock to the hole of the slot cover lock.
Using the enclosed slot cover lock can prevent the SD card slot cover from being opened.
Removing the SD card
1.
Perform the REMOVE MEDIA procedure using the PC-LESS PRESENTATION
menu under the MIU menu for SD storage card only.
2.
Turn the projector off and unplug the power code from the projector for the
wireless network card only.
3.
Remove the SD card slot cover. After taking the SD card away, replace the
SD card slot cover.
►Do not touch the SD card while being accessed.
►To use the wireless network function, the designated wireless network card
that is sold as an option is required.
• The wireless network card is not permitted to be sold or used in some countries
and regions. Use the card only in the country or region where you buy it. For
more information, ask your local dealer.
• When using the wireless network card, to comply with FCC RF exposure
compliance requirements, the antenna used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
• Before using the projector with a wired LAN, remove the wireless network card.
CAUTION
SD card slot cover
(SD card slot inside)
AUX I/O port
SD
CARD
SD
CARD
SD
CARD
Angled corner
Loading ...
Loading ...
Loading ...