Loading ...
Loading ...
Loading ...
21
ENGLISH
HOW TO USE
CYCLE GUIDE
The cycle guide below shows the default settings, available options
and recommended fabric types for each cycle. Allowable modifier
adjustments are shown below the default setting for each cycle.
Cycle
Fabric or
Load Type
Wash Mode Temp. Spin Soil
Soak
Stain
Care
Extra
Rinse
Water
Plus
Delay
Wash
PGM
Save
Pre Wash+
Normal
Cotton, linen,
shirts, jeans,
mixed loads
Extra High
● ● ● ●
Hot High
Warm Medium Normal
Cold
Low
Fabric Softener Tap Cold No Spin Light
Perm. Press
Dress shirts/
pants, wrinkle-
free clothing, poly/
cotton blend cloth-
ing, table- cloths
No Option Heavy
● ● ● ● ●
High
Turbo Wash™
Warm Medium Normal
Cold Wash Cold Low
Fabric Softener Tap Cold No Spin Light
Waterproof
Waterproof items
- i.e. Water
resistant clothing,
mattress covers,
outdoor clothes,
plastic mats etc.
(less than 14 lbs.)
No Option Heavy
● ● ● ●
Warm Normal
Cold Low
Tap Cold No Spin Light
Delicates
Dress shirts/
blouses, nylons,
sheer or lacy gar-
ments (less than
8 lbs.)
Heavy
● ● ● ● ●
Warm Normal
Cold Low
Fabric Softener Tap Cold No Spin Light
Towels
Big towels,
small towels
No Option Extra High Heavy
● ■
c
● ● ● ●
Hot High
Turbo Wash™ Warm Medium Normal
Cold Wash Cold Low
Fabric Softener Tap Cold No Spin Light
Speed Wash
Lightly soiled and
small loads
Extra High Heavy
● ● ● ● ●
High
Turbo Wash™ Warm Medium Normal
Cold Low
Tap Cold No Spin Light
Downloaded
The downloaded
cycle (See page
22.)
a
The Low spin speed is available only with the Heavy soil level.
b
Cold Wash and Extra Hot are not available with the Heavy soil level.
c
Stain Care cannot be used if Cold Wash is selected.
NOTE: The following options can only be used independently of each other: Steam, Turbo Wash™, Fabric
Softener, Cold Wash.
Soak and Stain Care cannot be selected together.
NOTE:
To protect your garments, not every wash/rinse temperature, spin speed, soil level, or option is available
with every cycle. A chime will sound and the LED will not light if the selection is not allowed.
* When a cycle is selected, the default time for that cycle is displayed. This time will change as modifiers
or options are selected. Once the START/PAUSE button is pressed, the washer will measure the load.
The estimated time may change once the load has been measured. The washer automatically adjusts the
wash time for the amount of laundry, water pressure, water and other operating conditions.
●
★
■
Default Setting
Available options
Cannot be used if Steam is selected
Turbo Wash™ will be deselected
Loading ...
Loading ...
Loading ...