Loading ...
Loading ...
Loading ...
29
HOW TO USE
ENGLISH
1. Water
Touch Water and press the lever to display the
water filling screen and dispense water.
If the cup or container is removed from
y
the lever, or the water dispenses for three
minutes, the water stops dispensing and the
display returns to the initial screen.
To dispense a set amount of water, touch Water
until you see the measured fill screen. On first
use, the screen defaults to cups. After use, the
screen defaults to the last unit used.
Display Window Dispenser Function
Touch the display window directly to operate the
ice and water dispenser.
The screen turns OFF after 20 seconds if
y
not touched.
Check the entire display window, touching
y
where needed to activate.
Pressing the dispenser lever when the
y
screen is OFF activates whatever dispensing
mode was last active. Removing the
container from the dispenser lever switches
the display to the initial screen.
After touching the display window, select
y
the desired mode (water, cold water, cubed
ice, crushed ice), and press the lever.
NOTE
Touching Stop while dispensing a set amount
stops the water dispensing and returns the
display to the previous screen.
The amount of water dispensed is not kept in
memory.
If the set amount is touched again, it
dispenses the full amount.
Press the lever
Release the lever
or after 3 minutes
operation
Touching Dispense Water on the measured
y
fill screen brings up the water filling screen
and immediately starts a set water dispense.
- Touching the left or right arrows on the
measured fill screen scrolls through set
amounts.
- Touching Stop while the water is dispensing
stops the water from dispensing and returns
the display to the previous screen. When the
set water dispense is completed, the display
returns to the initial screen.
Touch Dispense
Water
When water
dispense is
completed
Touch Stop
Loading ...
Loading ...
Loading ...