Loading ...
Loading ...
Loading ...
Cockpit54
Multifunction display (MFI)*
The multifunction display (MFI) shows you information on the
journey and fuel consumption.
The multifunction system uses two automatic memories: 1 - Actual
memory and 2 - Total memory. The selected memory will be shown
in the upper right-hand corner of the display.
Selecting a memory
– With the ignition switched on, briefly press button ⇒ fig. 33
on the windscreen wiper lever to move from one memory to
another.
Resetting a memory
– Select the memory that you would like to reset.
– Press and hold button on the windscreen wiper lever for at
least 2 seconds.
The trip memory 1 collects the travel and consumption rates from the
moment the ignition is switched on until it is switched off. If the journey is
continued within two hours of switching off the ignition, the new values will
be added to the existing trip recorder memory. The memory will automatically
be deleted if the journey is interrupted for more than two hours.
The total memory 2 collects the trip data for any number of individual jour-
neys (even if the ignition is switched off for longer than two hours) up to a
total of 19 hours and 59 minutes travel time or 1999 km distance travelled.
The memory will automatically be deleted if one of the named values is
reached.
Information in the multifunction display (MFI)*
You can switch between the following displays in the multifunction display
(MFI) by operating rocker switch ⇒ fig. 34 on the windscreen wiper lever.
Memory displays
• Driving speed
Fig. 33 Windscreen wiper
lever: button A and rocker
switch B
A
A
A
A
Fig. 34 Windscreen wiper
and windscreen wash
lever: button A and rocker
switch B
A
B
IbizaST_EN.book Seite 54 Dienstag, 14. September 2010 1:31 13
Loading ...
Loading ...
Loading ...