Loading ...
Loading ...
Loading ...
If and when232
Jump leads
Jump leads must comply with standard DIN 72553 (see manufacturer’s docu-
mentation). The wire cross section must be at least 25 mm
2
for petrol engines
and at least 35 mm
2
for diesel engines.
Note
• The vehicles must not touch each other, otherwise electricity could flow as
soon as the positive terminals are connected.
• The discharged battery must be properly connected to the vehicle elec-
trical system.
How to jump start: description
Jump lead terminal connections
1. Switch off the ignition of both vehicles ⇒ .
2. Connect one end of the red jump lead to the positive terminal
⇒ fig. 163 or ⇒ fig. 164 of the vehicle with the flat
battery .
3. Connect the other end of the red jump lead to the positive
terminal in the vehicle providing assistance .
4. On vehicles with no Start-Stop system, connect one end of the
black jump lead to the negative terminal in the vehicle
providing assistance ⇒ fig. 163.
5. On vehicles with the Start-Stop system, connect one end of the
black jump lead to a suitable ground terminal, to a solid metal
part bolted to the engine block or to the engine block itself
⇒ fig. 164.
Fig. 163 Diagram for
connecting jump leads if
the vehicle providing
assistance the current is
not fitted with the Start-
Stop system: flat battery
and battery providing
current .
A
A
A
B
Fig. 164 Diagram for
connecting jump leads if
the vehicle providing
assistance is fitted with
the Start-Stop system:
flat battery and
battery providing current
.
A
A
A
B
A
+
A
+
A
A
A
+
A
B
A
-
A
B
A
X
IbizaST_EN.book Seite 232 Dienstag, 14. September 2010 1:31 13
Loading ...
Loading ...
Loading ...