Loading ...
Loading ...
Loading ...
If and when224
– Move the loop in the direction of the arrow and remove the
cover ⇒ page 223, fig. 144.
– Remove connector ⇒ page 223, fig. 145 by pulling outward.
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Dipped beam and side lights
– Raise the bonnet.
– Remove the loop ⇒ fig. 146 in the direction of the arrow and
remove the cover.
– Remove the connector ⇒ fig. 147 from the bulb.
– Unclip the retainer spring ⇒ fig. 147 pressing inwards to the
right.
– Remove the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
A
1
A
2
Fig. 146 Dipped beam
headlights
Fig. 147 Dipped beam
headlights
A
1
A
2
A
3
IbizaST_EN.book Seite 224 Dienstag, 14. September 2010 1:31 13
Loading ...
Loading ...
Loading ...