Loading ...
Loading ...
Loading ...
8. System Select/Reset
button
This button is used to
perform four
functions.
a. Each time the
Select/Reset button is pressed and released in less
than three seconds, the odometer/trip counter will
switch between odometer and trip function
displays. The drive mode selector switch must be
in the D (Drive) or T (Turf) mode for this
function.
b. Pressing and holding the Select/Reset button,
with the odometer in the trip mode, for over 3
seconds before releasing will reset the trip
odometer to zero and return to the trip odometer
function. The drive mode selector switch must be
in the D (Drive) or T (Turf) mode for this
function.
c. Pressing and holding the Select/Reset button for
over three seconds will reset the battery water
reminder indicator. The drive mode selector
switch must be in the R (Reverse) mode and the
instrument cluster must be in “battery flooded
mode” for this function.
d. The Select/Reset button will allow you to
display diagnostic code(s). To display the
diagnostic code(s):
• With the key in the OFF position, press and hold
the Select/Reset button.
• Select D (Drive) mode with the key.
• Release the Select/Reset button.
• Press and release the Select/Reset button to scroll
through the diagnostic codes and their
corresponding odometer value.
• All codes will be deleted by holding the
Select/Reset button for three seconds and
releasing.
Instrumentation
7
Loading ...
Loading ...
Loading ...