Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
8
3 Attach the base support (12) to the base support plate using the two M6 × 10 mm screws (G), then tighten the screws
with the 4 × 4 Allen wrench (I).
4 Slide the decorative cover (8) all the way down the support tube until it covers the base support plate.
5 Loosen the knob on the bottom of the base support, slide the clamp assembly onto the edge of the desk, then tighten
the knob. Make sure that the clamp assembly is flush with the desk to prevent wobbling.
6 Go to STEP 3: Attaching the monitor support arms on page 11.
Desk
Loading ...
Loading ...
Loading ...