Loading ...
Loading ...
Loading ...
www.insigniaproducts.com
7
NS-PMM6230
STEP 2-Option 1: Attaching your monitor mount to a desktop edge
If you want to install your monitor mount through a desktop grommet hole, see STEP 2-Option 2: Attaching your mount
through a desktop grommet hole on page 9.
Select the position on the desk where you want your monitor mount installed. Make sure that there is enough room for the
monitors. The desk should be between .8 in. (2 cm) and 2 in. (5 cm) thick and strong enough to bear the weight of your
monitor.
1 Insert the tube bottom cover (10) into the base support plate (11), then insert the support tube (9) into the tube
bottom cover. Make sure that the holes on the bottom cover and the plate are aligned. Secure the assembly using the
M4 × 16 mm screw (E).
2 Insert the M10 × 20 mm screw (F) through the bottom of the base support plate, then tighten the screw using the
6 × 6 Allen wrench (H).
Notes:
• Make sure that the tabletop or desktop is square or rectangular. Your mount may not fit securely to an oval or irregularly shaped
surface.
• Make sure that the tabletop or desktop thickness is between .8 and 2.2 inches (2 and 5.5 cm).
Note: You need a Phillips screwdriver for this step.
Loading ...
Loading ...
Loading ...