Loading ...
Loading ...
Loading ...
7
- Internal Fridge Light
T
he light inside the fridge can be turned On and Off using the light
switch found on the right-
hand side
Replacing Lamps
Your BeefEater Fridge is using long
this
light, please contact your nearest BeefEater stockiest or service agent for a suitable
replacement part.
To change the light tube:
1. Unplug the power plug
and ensure the light switch is off.
2.
Remove the screws on both end of the light cover.
3. Take off the lam
p cover, pull out the wires slightly.
4.
Gently pull out the connector at the end of the light tube.
5.
Insert the connector into the new lamp, place the lamp cover and fasten it.
Technical Information
Note
: your BeefEater Fridge is built to eliminate an
the doors is never obstructed. This is achieved by heating the outer surface of the door slightly, and as
such it is normal for the door to feel slightly warm for the touch.
Woodland Home Products
3-5 Birmingham Av, Chester Hill, NSW,
Australia, 2162
Phone: 1800 356 660
Facsimile: 02 9724 8899
E-mail: mail@beefeaterbbq.com
Website: www.beefeaterbbq.com
USA TollFree: 1866 550 2333
he light inside the fridge can be turned On and Off using the light
hand side
internal wall of the fridge:
Your BeefEater Fridge is using long
-life, energy-saving LED light tube.
Should you need to replace
light, please contact your nearest BeefEater stockiest or service agent for a suitable
and ensure the light switch is off.
Remove the screws on both end of the light cover.
p cover, pull out the wires slightly.
Gently pull out the connector at the end of the light tube.
Insert the connector into the new lamp, place the lamp cover and fasten it.
: your BeefEater Fridge is built to eliminate any fog accumulating on the glass doors, so vision through
the doors is never obstructed. This is achieved by heating the outer surface of the door slightly, and as
such it is normal for the door to feel slightly warm for the touch.
Images in this manual are for illustrative purposes only.
Due to constant improvement, BeefEater advises that
changes to the desig
n, material, specifications and product
configuration may occur at any time without notice.
Should you need to replace
light, please contact your nearest BeefEater stockiest or service agent for a suitable
Insert the connector into the new lamp, place the lamp cover and fasten it.
y fog accumulating on the glass doors, so vision through
the doors is never obstructed. This is achieved by heating the outer surface of the door slightly, and as
Images in this manual are for illustrative purposes only.
Due to constant improvement, BeefEater advises that
n, material, specifications and product
configuration may occur at any time without notice.
Loading ...