Loading ...
Loading ...
Loading ...
5
Electronic Control
The electronic controller
is located
It looks like this:
During normal operation the
controller
refrigerator.
A small indicator light
fridge is in its normal cooling mode
Operation of the controller:
-
To set the desired temperature of the fridge:
o Press the
button
o Use the
o Press
again to complete the operation, or just leave it for 5
display will revert back to showing internal temperature
Note:
The fridge is built to automatically defrost and prevent any ice forming on the Evaporator.
It will automatically run a ‘Defrost cycle for 20min once every 8 hours.
When in a ‘Defrost’ cycle, the indicator light will
is located
outside the unit on the bottom, right-
hand side front plinth.
controller
display
will show the temperature inside the
will illuminate under the ‘Cooling’ symbol to confirm the
fridge is in its normal cooling mode
, and compressor is running.
To set the desired temperature of the fridge:
button
once. A ‘beep’ will sound, and t
he display will start to flash.
buttons to set to the desired temperature.
again to complete the operation, or just leave it for 5
display will revert back to showing internal temperature, while new settings saved.
The fridge is built to automatically defrost and prevent any ice forming on the Evaporator.
It will automatically run a ‘Defrost cycle for 20min once every 8 hours.
When in a ‘Defrost’ cycle, the indicator light will illuminate under the ‘
hand side front plinth.
will show the temperature inside the
will illuminate under the ‘Cooling’ symbol to confirm the
he display will start to flash.
again to complete the operation, or just leave it for 5
– 10 sec, and the
, while new settings saved.
The fridge is built to automatically defrost and prevent any ice forming on the Evaporator.
It will automatically run a ‘Defrost cycle for 20min once every 8 hours.
illuminate under the ‘
Defrost’ symbol:
Loading ...
Loading ...
Loading ...