Loading ...
Loading ...
Loading ...
14_ installing the dishwasher
STEP 7 PLACING THE DISHWASHER AND CONNECTING THE HOT
WATER SUPPLY LINE
1. Adjust the three leveling legs at the bottom of the dishwasher after measuring the height
of the cabinet opening from under the countertop to the fl oor. (See Step 8, Leveling the
Dishwasher.)
2. Locate the hot water supply line and the power cable.
3. Place the dishwasher so that the hot water supply line is in the left side and the power cable
is in the right channel of the base of the dishwasher. The right-side channel for the power
cable has a built-in hook on the base so that you secure the power cable.
4. Pull the drain hose through the hole in the sink cabinet side wall. Keep it free of kinks.
5. Make sure the hot water supply line is not twisted, and then connect the hot water supply
line to the fi tting joint.
6. Slide the dishwasher carefully into the installation space. If possible, gently pull any excess
lengths of water supply line, drain hose, or power cable back as you move the dishwasher.
Get a second or third person to help you do this if necessary.
Do not place the dishwasher on the water supply line, drain hose, or power cable.
Also, make sure they are not folded or twisted.
Make sure the supply line is properly connected.
Wrap Tefl on tape around every connection to prevent water leaks.
<Figure 5>
CAUTION
Do not overtighten the 90˚ Fitting.
(Below 280 lb·in (31.6 N·m))
Doing so may damage the water inlet
valve and cause a water leak.
built-in hook
built-in hook
Power cable
Power cable
Hot Water Supply Line
Hot Water Supply Line
Drain hose
Drain hose
Hot Water Supply Line
Hot Water Supply Line
Elbow (¾" (9.5 mm))
Elbow (¾" (9.5 mm))
Inlet valve
Inlet valve
Junction box
Junction box
Make sure the dishwasher is positioned to the center.
installing the dishwasher
CAUTION
CAUTION
DW9900M-00183A-01_EN.indd Sec3:14DW9900M-00183A-01_EN.indd Sec3:14 1/2/2017 12:41:08 PM1/2/2017 12:41:08 PM
Loading ...
Loading ...
Loading ...