Loading ...
Loading ...
Loading ...
en
14
[filter change]
After 6 months you are prompted via the [filter change]
display message to replace the filter cartridge.
Activating new filter cartridge
When the filter cartridge has been replaced,
the [filter change] function must be re-activated.
1. Change filter cartridge (see chapter “Water filter”).
2. Keep pressing the “options” button, until the [filter
change] function is marked with an arrow.
3. Activate by pressing the setting buttons +/-. [filter
change] display goes out.
Home Connect
This appliance is Wi-Fi-capable and can be remotely
controlled using a mobile device.
Note
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
In the following cases, the appliance functions like a
refrigerator without a network connection and can still
be manually operated via the controls:
■ The appliance is not connected to a home network.
■ Home Connect service is not available in the country
in which the appliance is set up. For an overview of
the countries in which Home Connect is available,
see www.home-connect.com.
In order to use the Home Connect functions, connect
the appliance to a Home Connect Wi-Fi dongle.
If a Home Connect Wi-Fi dongle is not supplied with
your appliance, you can order one from customer
service.
Note
Connection and disconnection of the appliance plug
may be more difficult than expected.
Attach the Wi-Fi dongle at a height of one metre.
Notes
■ Please observe the safety information in these
operating instructions and ensure that this is still
observed even if you operate the appliance via the
Home Connect app and are not at home when doing
so.
You must also follow the instructions in the Home
Connect app.
■ If the appliance is being operated using the controls
on the appliance itself, this mode always has priority.
During this time, it is not possible to operate the
appliance using the Home Connect app.
Setting up Home Connect
Notes
■ Observe the Home Connect supplementary sheet,
which is available for download under http://
www.bosch-home.com with the instructions. To do
so, enter the E-number of your appliance in the
search field.
■ After switching on the appliance, wait at least two
minutes until internal device initialisation is complete.
Only then start setting up Home Connect.
■ To implement settings with Home Connect, you must
have installed the Home Connect app on your
mobile device. Observe the supplied Home Connect
documents for this. Follow the steps specified by the
app to implement the settings.
■ The Home Connect menu will close automatically
when the appliance is not operated for a lengthy
period of time. You can find information on how to
open the Home Connect menu at the start of the
appropriate sections.
Automatic connection with the home network (WLAN)
If a WLAN router with WPS function is available, the
refrigerator can automatically connect to the home
network.
1. Press the Options button and the Alarm off/lock
button simultaneously.
"Cn" is shown in the freezer compartment display.
Note
Press both buttons simultaneously. The button
operation is locked if only the Alarm off/lock button
is pressed for an excessively long period.
2. Keep pressing the Options button until "AC" is shown
in the freezer compartment display and "OF" is
shown in the refrigerator compartment display.
3. Press the adjustment button +.
The appliance is ready for the automatic connection.
An animation is shown in the refrigerator
compartment display for 2 minutes.
The appliance is ready for the automatic connection
for as long as the animation is displayed.
4. Within those 2 minutes, activate the WPS function on
the home network router (e.g. using the WPS/WLAN
button; observe information on this topic in the router
documentation).
If the connection is successful, "On" flashes in the
refrigerator compartment display.
The refrigerator is ready to connect with the app.
Note
If "OF" is shown in the refrigerator compartment display,
it was not possible to establish a connection.
1. Check whether the refrigerator is located within the
range of the home network (WLAN).
2. Repeat the process or establish the connection
manually.
Loading ...
Loading ...
Loading ...