Loading ...
Loading ...
Loading ...
8
Installation
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 4 hours. This
will reduce the possibility of a malfunction in the cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
INSTALLATION OF YOUR APPLIANCE
The appliance is designed for freestanding installation.
WARNING: Do not store or install the appliance outdoors.
CAUTION: This appliance is designed for storing and cooling beverage or wines. Do not store perishable
food, medicine or other medical products.
Place your appliance on a hard and level floor that is strong enough to support it when it is fully loaded.
To level your appliance, adjust the leveling legs at the bottom of the appliance if needed.
Allowance of at least 5 inches (127mm) of space between the back and sides of the appliance are
suggested, which allows the proper air circulation to cool the compressor and condenser.
We do not recommend installing the appliance on carpet.
Do not install the appliance near an oven or other heating source. Direct sunlight may affect the acrylic
coating and heat sources may increase electrical consumption. For best performance, do not install the
appliance behind a cabinet door or block the base grille. Extreme cold ambient temperatures may also
cause the appliance not to perform properly.
Avoid locating the appliance in area that may be exposed to excessive moisture.
Plug in the appliance into an exclusive, grounded wall power outlet. Do not under any circumstances cut
or remove the third (ground) prong from the power cord. Any questions concerning power and/or ground-
ing should be directed toward a qualified electrician or an authorized service center.
INSTALLATION LOCATION
Your beverage refrigerator should be conveniently located for day-to-day use in a dry, well-ventilated room.
Do not install the appliance where the temperature will go below 60°F or above 90°F, because it will not main-
tain proper temperatures. Be sure to install your beverage refrigerator on a floor strong enough to support it
when it is fully loaded.
WARNING
To reduce the risk of fire, electrical shock, or injury
when using your appliance, follow these basic pre-
cautions:
Read all instructions before using the appliance.
DANGER or WARNING: An empty beverage refrigerator can be a hazardous for children or small
pets. If disposing of the beverage refrigerator, remove gasket seals, latches, lids or the entire door from
your unused appliance, or take other action to ensure the beverage refrigerator is harmless.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids or harsh chemicals. The fumes can create a fire haz-
ard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any oth-
er appliance. The fumes can create a fire hazard or explosion.
Loading ...
Loading ...
Loading ...