Loading ...
Loading ...
Loading ...
10
Operation and Controls
It is recommended you install the appliance in a place where the ambient temperatures is above 60°F (16°C)
and below 90°F (32°C). If the ambient temperature is above or below recommended temperatures, the per-
formance may be affected. For example, placing your appliance in extreme cold or hot conditions may cause
interior temperatures to fluctuate.
TEMPERATURE CONTROL FOR BR-062WS
The temperature inside the beverage refrigerator is controlled by a thermostat con-
trol knob. The thermostat control box is located in the compressor compartment at
the back of the unit. To operate this control,
turn the thermostat control knob up or down to regulate the temperature inside the
beverage refrigerator. The
“0 – 5” number markings on control knob indicates the different temperature set-
tings. Position “0” being the warmest and position “5” being the coldest.
TEMPERATURE CONTROL FOR BR-091WS / BR-128WS
To control the internal temperature, turn the temperature control dial inside
the appliance. The temperature range is from "0” to “7”, where “7” is the cold-
est temperature setting and “0” is the warmest temperature setting.
INTERIOR LIGHT (only available for BR-091WS / BR-128WS)
To turn on/ off the interior light, flip the switch inside the appliance.
INTERNAL FAN (only available for BR-091WS / BR-128WS)
This beverage refrigerator is equipped with an internal fan that prevents une-
ven temperature distribution, ensuring all of your beverage reaches your de-
sired temperature .
PARTS:
1. Temperature Control
2. Light Switch
3. Interior Light
4. Internal Fan
REVERSING THE DOOR SWING
Tools needed: flathead screwdriver, Phillips screwdriver
CAUTION: Before you begin, unplug the beverage refrigerator from
power.
To remove the door:
1. Using a flathead screw driver carefully pry the top hinge cover off.
2. Using a Phillips screwdriver, remove the screws and take off top hinge.
Keep the parts together and set them aside.
3. Lift the door off the bottom hinge and set the door aside.
4. Remove the bottom hinge by removing the screws with a Phillips head
screwdriver.
To install the door:
1. Using a flathead screwdriver, remove the plugs and cover from the oppo-
site cabinet top corner and from the door. Set aside.
2. Install the bottom hinge at the opposite side corner and fasten the screws.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and install the top hinge.
5. Push the plugs and covers into the corresponding holes.
Loading ...
Loading ...
Loading ...