Loading ...
Loading ...
Loading ...
Installation information
91
Cabinet doors
An upper cabinet door for the
refrigerator section and a lower cabinet
door for the freezer section are
required.
The cabinet doors must be at least
5/8" (16mm) / 3/4" (19mm) thick.
If the cabinet doors are too
heavy, this can cause damage!
Fitted cabinet doors that exceed the
permissible weight can cause
damage to the hinges, which can
affect the functioning of the
appliance.
Before fitting cabinet doors, ensure
that the weight of the door does not
exceed the maximum permitted.
Appliance Maximum weight of
cabinet door
Upper
cabinet
door
Lower
cabinet
door
KFNS 37692
iDE-1
37.5lbs
(17kg)
26.5lbs
(12kg)
Calculating cabinet door sizes
The width of the cabinet doors
depends on the style of the kitchen and
the gap between the unit door panels.
When calculating the height of the
cabinet doors, remember that the top
edge of the cabinet doors must be at
the same height as that of the doors of
the adjacent units.
The following gaps are required:
– The horizontal gap between the
cabinet door and the cupboard door
above it must be at least
1/8'' (3mm).
– The vertical gap between the cabinet
doors should be approx. 1/8'' (3mm).
The exact value will depend on the
radius of the edge of the cabinet
door.
The cabinet door must be installed
level, and not under tension.
Tip: Please also see the diagram and
information on the following pages on
calculating the cabinet door height.
Loading ...
Loading ...
Loading ...