Loading ...
Loading ...
Loading ...
Installation information
90
If you wish to fit a grille in the
ventilation openings, the ventilation
openings must be larger than 31
square inches. The passage volume
of 31 square inches is the total area
of the opening slits in the grille.
– Important! The larger the ventilation
slits, the more economically the
appliance will work.
The ventilation slits must not be
blocked or obstructed in any way.
Clean the ventilation slits on a
regular basis.
Upper ventilation slit
The ventilation slit at the top of the
appliance can be constructed in
different ways:
a
directly above the appliance with a
ventilation grille (total passage
volume of min. 31 square inches)
b
between the cabinetry and the
ceiling
c
through a suspended ceiling.
Lower ventilation slit
The appliance can be ventilated via the
cabinet plinth with the ventilation grille
supplied or with a minimum ventilation
opening of 31 square inches cross-
section area. When using the grille
supplied, please proceed as follows:
Cut an opening in plinth as shown
in the diagram.
Place ventilation grille in the
opening.
Push snap fasteners into the
ventilation grille from behind until the
hooks touch the plinth.
Reinstall the plinth with the ventilation
grille.
Loading ...
Loading ...
Loading ...