Loading ...
Loading ...
Loading ...
Building in the appliance
112
Tighten nuts on the appliance
doors with ring spanner while
counter-holding adjusting bolts
with a screwdriver.
Filler strip must not protrude; it
must completely disappear into the
niche.
Pre-drill fixing holes in the cabinet
door and fasten screws. Make sure
both metal edges are flush
(//symbol).
Close the appliance door and the
cabinet door.
- Adjusting the depth (Z)
Loosen screws at the top of the
appliance door and screw at the
bottom of the securing bracket. Push
on the appliance door until there is a
gap of 1/16" (2mm) between the
cabinet door and the cabinet carcase.
Loading ...
Loading ...
Loading ...