Loading ...
Loading ...
Loading ...
13
Stitch Length Dial
Depending on the selected stitch, you may need to
adjust the stitch length for best results. The numbers
marked on the stitch length dial represent the stitch
length in millimeters (mm) (1/25").
THE HIGHER THE NUMBER, THE LONGER THE
STITCH. With the “0” setting material is not fed. This
is used when sewing on a button.
The “ ” range is for making a satin stitch (close zigzag
stitch), which is used for making buttonholes and
decorative stitches. The position needed for making the
satin stitch varies according to the material and thread
being used. To determine the exact dial position, first
test the stitch and length settings on a scrap piece of
fabric to observe the feeding of the material.
1 Stitch length dial
2 Longer
3 Shorter
Stretch Stitching
■ Selecting a stretch stitch
Setting the stitch length dial to “ ” changes the
selected pattern to a stretch stitch.
■ Adjusting the stretch stitching
The machine is adjusted at the factory so that the
stretch stitching can be sewn with the stitch
length dial set to “ ” (standard position).
5
SHELL TUCK STITCH
3-5
(1/8-3/16)
-3
(1/64-1/8)
27
6
ELASTIC STITCH
3-5
(1/8-3/16)
-2.5
(1/64-3/32)
28
7
DOUBLE ACTION STITCH
3-5
(1/8-3/16)
-3
(1/64-1/8)
29
8
BLIND HEM STITCH
3-5
(1/8-3/16)
-2
(1/64-1/16)
27
9
TRIPLE ZIGZAG STRETCH STITCH
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
30
10
TRIPLE STRETCH STITCH
0-5 (0-3/16)
(Changes needle position)
Fixed
2.5 (3/32)
25
11
ARROWHEAD STITCH
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
29
12
ELASTIC OVERLOCK STITCH
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
29
13
FEATHER STITCH
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
29
14
LEAF STITCH
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
—
15
STRETCH OVERLOCK STITCH
3-5
(1/8-3/16)
Fixed
2.5 (3/32)
29
1
1
23
2
0
1
● If the stitches are bunched together,
lengthen the stitch length and continue
sewing. Do not continue sewing without
lengthening the stitch length, otherwise
the needle may break and cause injury.
CAUTION
SS
SS
SS
XL5000us.book Page 13 Tuesday, October 28, 2003 11:01 AM
Loading ...
Loading ...
Loading ...