User Manual Hotpoint FDD9640KUK Ultima FDD 9640 K Washer Dryer

Connect the supply pipe by screwing it to a cold water tap using a 3/4 gas threaded connection.
Before performing the connection, allow the water to run freely un- til it is perfectly clear.
Connect the other end of the water inlet hose to the washer- dryer, screwing it onto the appliance’s cold water inlet, situated on the top right-hand side on the rear of the appliance.
Make sure there are no kinks or bends in the hose.
The water pressure at the tap must be within the values indicated in the Technical details table.
If the water inlet hose is not long enough, contact a specialist store or an authorised serviceman.
Ensure that the supply taps are allowing wa- ter through. Old taps may seize in the closed position and thus prevent water reaching the machine.
Never use second-hand or old inlet hoses; use the products supplied with the machine.