#2 I have a hunter control box , this one does it require any new wiring
or anything or is it simply take out old box and connect new box ?
It's very easy, should take no longer then 15-20 minutes.
Tools needed: Screwdriver
1. Remove old controller from wall, writing down which colored
wires go in each slot. (For example, red wire goes in slot 1,
meaning your first zone is a red wire.)
2. Once all the wires are written down completely disconnect all
wires from the old controller and reconnect to the new
controller. (Please ensure power is unplugged)
3. Mount controller to the wall
4. Plug in power
There are great youtube videos that describe exactly how to do
this, if you get stuck please feel free to reach out to me and I will
walk you through it
