Loading ...
Loading ...
Loading ...
• INSERT THE PLASTIC STAKES THAT ARE PROVIDED INTO THE SOIL OF
THE POTS. IT IS BEST TO PLACE THE STAKES CLOSE TO THE STEMS OF
THE PLANTS. USE ONE OR MORE STAKES PER POT, DEPENDING ON
THE POT SIZE AND INDIVIDUAL PLANTS' WATER REQUIREMENTS.
NOTE THAT THERE WILL BE
ONE DRIPPER FOR EACH
STAKE. OASIS CAN BE USED
WITH UP TO 20 DRIPPERS.
N.B.: ONE DRIPPER IS
SUFFICIENT FOR SMALL AND
MEDIUM-SIZED POTS; WE
RECOMMEND TWO DRIPPERS
FOR LARGE POTS.
• NOW UNWIND THE WATER
DISTRIBUTION HOSE.
• CONNECT ONE END OF THE
HOSE TO ONE OF THE TWO
CONNECTIONS IN THE BOTTOM OF THE OASIS FRONT PANEL
(SEE PHOTO 4). PRESS THE
HOSE FIRMLY INTO PLACE TO
ENSURE IT CANNOT BE
ACCIDENTALLY
DISCONNECTED.
• NOW LAY THE HOSE
AROUND THE POTS, FITTING IT
INTO THE INDIVIDUAL STAKES.
IT IS BEST TO TAKE THE
SHORTEST WAY BETWEEN
ONE POT AND THE NEXT.
(SEE PHOTO 5). PUSH THE
HOSE INTO THE STAKE UNTIL IT
TAKES ON THE CORRECT
SHAPE, TAKING CARE NOT TO CREATE KINKS IN THE HOSE.
• ONCE ALL THE POTS HAVE BEEN CONNECTED, BRING THE HOSE
BACK TO THE SECOND CONNECTION IN THE BOTTOM OF OASIS; IF
NECESSARY, CUT OFF THE EXCESS HOSE USING SCISSORS.
CONNECT THE OTHER END OF THE HOSE TO THIS SECOND
CONNECTION (SEE PHOTO 6).
• YOU HAVE NOW CREATED THE LOOP CIRCUIT OF HOSE WHICH WILL
DISTRIBUTE THE WATER TO THE POTS.
4
5
17
UK
•2_OASIS_UK_[11-20] 20-09-2004 15:55 Pagina 17
Loading ...
Loading ...
Loading ...