Loading ...
Loading ...
Loading ...
HOW TO INSTALL OASIS AND PUT IT
INTO OPERATION FOR THE FIRST TIME
• F
ITTING THE BATTERY USING THE
TWO SIDE BUTTONS ON THE
FRONT PANEL, SIMPLY
DISCONNECT AND PRESS-FIT
THE BATTERY TERMINLAS. MAKE
SURE THAT THE BATTERY IS
CORRECTLY POSITIONED IN ITS
HOUSING (PHOTO 1). USE ONLY
9 V. ALKALINE BATTERIES AND
MAKE SURE THAT THE BATTERY
IS CHARGED. TO DO THIS, TURN
THE PROGRAMMING SELECTOR
SWITCH ON THE FRONT OF
OASIS TO ANY POSITION. IF
THE LED (PHOTO 2) FLASHES
ABOUT EVERY 2 SECONDS, THE
BATTERY IS CHARGED; IF IT
REMAINS OFF, THE BATTERY HAS
TO BE CHANGED (WE ADVISE
YOU ALWAYS TO CHANGE THE
BATTERY ONCE A YEAR).
• LIFT OASIS BY TAKING HOLD OF
THE BOTTOM WITH BOTH
HANDS, AND PLACE IT ON A
SURFACE 70-80 CM ABOVE THE
FLOOR (PHOTO 3).
N.B.: OASIS IS DESIGNED FOR
INDOOR USE; TO ENSURE THE
WATER DOES NOT OVERHEAT,
OASIS SHOULD BE PLACED IN
THE SHADE AND IN A COOL
PLACE, WELL AWAY FROM
WINDOWS OR GLAZING, AND
WELL OUT OF DIRECT SUNLIGHT.
•
PLACE THE PLANT-POTS ON THE
FLOOR CLOSE TO THE SURFACE
ON WHICH OASIS IS STANDING
(THE POTS MUST BE IN SAUCERS
TO COLLECT ANY WATER EXCESS).
1
3
2
16
UK
•2_OASIS_UK_[11-20] 20-09-2004 15:55 Pagina 16
Loading ...
Loading ...
Loading ...