Loading ...
Loading ...
Loading ...
UK
21
• AFTER USE, BEFORE PUTTING OASIS AWAY TAKE CARE TO DRAIN THE
DISTRIBUTION CIRCUIT (HOSE AND DRIPPERS) COMPLETELY AND
REMOVE THE BATTERY. THIS WILL ENSURE THE DEVICE WILL BE EASILY
PUT BACK INTO OPERATION NEXT TIME IT IS REQUIRED.
• DO NOT DISCONNECT THE DRIPPERS FROM THE HOSE: YOU WILL
AVOID THE RISK OF LOSING PIECES, AND THE DISTRIBUTION CIRCUIT
WILL BE READY-MADE AND READY FOR USE NEXT TIME. FOR
CONVENIENT STORAGE, THE CIRCUIT CAN BE PLACED INSIDE THE
EMPTY TANK.
• IF THE NUMBER OF PLANTS INCREASES, MORE LENGTHS OF HOSE
AND DRIPPERS CAN BE ADDED TO THE CIRCUIT, UP TO A MAXIMUM
OF 20 DRIPPERS.
• THE FILTER SHOULD BE CLEANED REGULARLY, AFTER EACH SEASON
OF USE, TO REMOVE ANY DIRT FROM THE WATER TRAPPED IN THE
FILTER MESH.
• AFTER USE WE ADVISE YOU TO: DRAIN OUT THE REMAINING WATER,
CLEAN THE INSIDE OF THE TANK WITH AN ABSORBENT CLOTH, LEAVE
TO DRY AND PUT OASIS AWAY WITH THE LID ON.
WHAT TO DO IF:
THE LED DOES NOT COME ON WHEN YOU FIT THE BATTERY:
• THE BATTERY IS FLAT.
• CHECK THE ELECTRICAL CONNECTIONS AND THAT THEY HAVE BEEN
CONNECTED CORRECTLY
NO WATER COMES OUT OF THE DRIPPERS:
• DISCONNECT THEM AND CHECK THEY ARE NOT CLOGGED WITH DIRT
FROM THE WATER. REPLACE THE DRIPPERS, TAKING CARE THAT THEY
ARE FIRMLY CONNECTED.
• CHECK THAT THERE ARE NO KINKS OR RESTRICTIONS IN THE
DISTRIBUTION HOSE.
• CHECK THAT OASIS IS 70/80 CM ABOVE THE GROUND AND AT LEAST
50 CM ABOVE THE RIM OF THE TALLEST POT.
• CHECK THAT THERE ARE NO AIR BUBBLES IN THE DISTRIBUTION HOSE.
IF THERE ARE ANY, DISCONNECT BOTH ENDS OF THE HOSE FROM
THEIR CONNECTIONS, BLOW INTO THE HOSE TO DRIVE ALL THE
WATER OUT, AND RECONNECT THE DISTRIBUTION HOSE TO OASIS AS
DESCRIBED IN THE INSTALLATION PROCEDURE.
•2_OASIS_UK_[11-20] 20-09-2004 15:55 Pagina 21
Loading ...
Loading ...
Loading ...