Loading ...
Loading ...
Loading ...
10
Installation
Freestanding Installation
1
Assemble the charging station stand by
inserting the support pipe into the base. Slide
the charging station onto the top of the support
pipe. Take care to avoid pinch points.
CAUTION
•
Avoid getting your ngers stuck in any gaps.
2
Insert the power cable into the jack at the back
of the charging station. Clip the cord into the
cable hook under the jack.
•
Keep the cord tidy by threading it through
the anchoring ring on the back of the support
pipe.
①
②
3
After ensuring there are no pipes or wires in
the way inside the wall, make a hole at the
appropriate height to anchor the charging
station and insert the wall anchor.
•
Recommended diameter of hole:
Φ
6.5;
Recommended depth: 100 mm.
Wall anchor
4
Put the anchoring block on the back of the
charging station and anchor the charging station
with the screw.
•
Make sure to fully tighten the screw.
Stand setscrew
Wall-anchoring block
Wall
anchor
Using Double-Sided Tape
Do not use this installation method on wallpaper.
1
Use double-sided tape to attach the wall
anchoring block to the charging station in step 4.
•
Discard the center section of one piece of
double-sided tape before attaching the tape to
the block.
Wall-anchoring block
2
Use the entire second piece of tape to anchor
the station to the wall.
MFL69883611_en_180523.indd 10 2018-05-23 오후 12:26:33
Loading ...
Loading ...
Loading ...