Loading ...
Loading ...
Loading ...
• Reassemble the filters (A) and (B).
• Put back the filter (A) in the flat filter (C). Turn it clockwise until it locks.
An incorrect position of the filters can cause bad washing results and damage to the
appliance
CLEANING THE LOWER SPRAY ARM
We recommend to clean the lower spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
1. To remove the lower spray arm, pull it upwards.
2. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes.
3. To install the spray arm back, press it
downwards.
CLEANING THE TOP SPRAY ARM
We recommend to clean the top spray arm
regularly to prevent soil from clogging the holes.
Clogged holes can cause unsatisfactory washing
results.
The top spray arm is placed on the ceiling of the
appliance. The spray arm (C) is installed in the
delivery tube (A) with the mounting element (B).
A
B
C
1.
Release the stoppers on the sides of the
sliding rails of the cutlery drawer and pull the
drawer out.
2
1
2. Move the upper basket to the lowest level to
reach the spray arm more easily.
3. To detach the spray arm from the delivery tube,
turn the mounting element counterclockwise
and pull the spray arm downwards.
4. Wash the spray arm under running water. Use
a thin pointed tool, e.g. a toothpick, to remove
particles of soil from the holes. Run the water
through the holes to wash soil particles away
from the inside.
5. To install the spray arm back, insert the
mounting element in the spray arm and fix it in
the delivery tube by turning it clockwise. Make
sure that the mounting element locks into
place.
6. Install the cutlery drawer on the sliding rails and
block the stoppers.
13
Loading ...
Loading ...
Loading ...