Loading ...
Loading ...
Loading ...
Home Connect en
17
Verify signal strength
You should verify the signal strength if
no connection can be established.
1. Press the F button.
The refrigerator compartment
temperature display shows Cn.
2. Press button ( / ) refrigerator
compartment until the refrigerator
compartment temperature display
shows SI. In the freezer
compartment temperature display a
value appears between 0 (no signal)
and 3 (full signal).
The signal strength should be at
least 2. If the signal strength is too
weak, the connection may be
interrupted.
– Place the router and refrigerator
closer together.
– Ensure that the connection is not
interfered with by screening walls.
– Alternatively, install a repeater to
make the signal stronger.
Resetting Home Connect settings
If there is a problem when trying to
establish a connection or if you would
like to register the appliance in a
different home network (WLAN), the
Home Connect settings can be reset:
1. Press the F button.
The refrigerator compartment
temperature display shows Cn.
2. Press button ( / ) refrigerator
compartment until the refrigerator
compartment temperature display
shows rE and the freezer
compartment temperature display
shows OF.
3. Press button ( / ) freezer
compartment.
Freezer compartment temperature
display shows an animation for 15
seconds.
Then the freezer compartment
temperature display shows OF.
The Home Connect settings have
been reset.
Installing updates for the
Home Connect software
The refrigerator checks at regular
intervals whether updates are available
for the Home Connect software.
If an update is available, the refrigerator
compartment temperature display
shows UP.
Pressing any button will reset the
display to the set temperature.
Installing the update:
1. Press the F button.
The refrigerator compartment
temperature display shows Cn.
2. Press button ( / ) refrigerator
compartment until the refrigerator
compartment temperature display
shows UP and the freezer
compartment temperature display
shows OF.
3. Press button ( / ) freezer
compartment.
The freezer compartment
temperature display shows an
animation.
The update will be installed.
During the installation, all buttons are
locked.
– If the installation was successfully
completed, the freezer
compartment temperature display
will show On.
– If the installation was not
successfully completed, the
freezer compartment temperature
display will show Er.
Start the update again at a later
time.
Inform the Customer Service if
the installation has still not been
successfully completed after
several attempts.
Loading ...
Loading ...
Loading ...